This attic is 1,983 square feet. When we first arrived on site it was completely covered in mold. The inspector identified the source as an improper ventilation issue. Understandably so, the homeowner was unable to fix the source until the mold was remediated. They called our office and Eric went out to give them an estimate. Soon after the estimate was accepted by the homeowner, our techs, Austin and Josh were onsite in full Tyvek suits setting up the containment and starting the remediation process. In the first day we were able to set-up the containment, remediate and set the air scrubbers. Upon the final walk through with the homeowner, the attic was clear of mold and ready to start fixing the source of the problem.